How to Repair A Dildo Sex Toy?

Hey, my friends, welcome to my blog. Today we're going to talk about How to Repair A Dildo Sex Toy .Don't be shy or embarrassed yet. According to statistics, 73% of adults have experienced the awkward situation of their toys suddenly "breaking down". Now, take out that "half-paralyzed" treasure from your drawer, and let's fix it while having a good chat.

It is comparable to surgery on human skin to repair a silicone or PVC dildo. Prior to starting the repair thing, you must have anything you need to do on hand. When an open wound is left for a long time, it can become infected and lead to blood loss a lot. The dildo requires glue, so waiting too long isn't a good idea. Just remember to wear gloves to protect your hands and work on a clean surface or table. When you have great sex, you feel comfortable, don't you? You feel positive, relaxed, and confident. Your dildo sex toy can help you achieve that same level of satisfaction without your sex partner around. So, when some time, your dildo is broken, you need to know how to repair it well, so that you can use it for a long time.

In the market, you will always find different kinds of dildo sex toys online, just as vibrating dildos, heating dildos, silicone dildos, and so on. If you have bought the electric dildos, then repairing maybe a little difficult and it may need some special knowledgement. And the non-electric dildos are easy to repair if they are broken. I would like to teach you how to repair them as follows. If you still have any questions after reading our post, please contact our service, and we will help you out.

What tools do you need to repair a dildo?

First, you need food-grade silicone glue. Make sure it has the FDA certification mark. This is crucial. You mustn't use 502 glue on your sensitive parts. 502 glue not only has too strong adhesion and is difficult to control the amount used, but it may also contain harmful chemicals to the human body. Once it comes into contact with private parts, the consequences are unimaginable. Food-grade silicone glue is safe and reliable, and can effectively repair silicone sex toys without causing any harm to the body. Next is a UV curing lamp. A nail lamp can fully meet the requirements. It can not only be used to repair sex toys but also allow you to do a gel manicure while waiting for the glue to dry, killing two birds with one stone. Using a UV curing lamp can make the glue dry quickly, significantly reducing the repair time and improving the repair efficiency. Don't underestimate surgical-grade lubricant or think it's funny. It's the best temporary waterproof layer. During the repair process, if you need to waterproof some parts, surgical-grade lubricant can come in handy. It's non-toxic and harmless, won't corrode the material of a dildo sex toy, and can form a thin protective film to prevent water.

For those who like to play with electro-stimulation toys, a heat shrink tube set is a must-have tool. When heated, heat shrink tubes contract and tightly wrap around the wires or components that need protection, providing insulation and protection. Its contraction performance is even better than that of an ex's heart. It can effectively prevent short circuits and extend the lifespan of the toy.A 3D printing pen is a magical tool. When there are gaps in the adildo sex toy, the 3D printing pen can come into play. It can extrude hot-melt plastic to fill the gaps according to your design, and the repair effect is even more amazing than using PS software to process pictures. Whether it's repairing scratches on the surface of the toy or reshaping some damaged small parts, the 3D printing pen can handle it with ease. When buying tools at a hardware store like Home Depot, remember to wear sunglasses. When the cashier sees the hot glue gun and vibrating motor you bought, the scene might be a bit awkward. You know what I mean. Wearing sunglasses can help ease the awkward atmosphere and make your shopping more comfortable. 

What should we do when a dildo sex toy cracks?

The "little wolf dog" that was full of vitality last night turned into a "grinning mouth" this morning. Don't panic when encountering such a situation. Carefully clean the crack with 75% alcohol cotton pads. This step is very crucial. Make sure the crack is clean and free of impurities, otherwise it will affect the bonding effect of the glue. Never use alcohol beverages like whisky to clean it. Don't ask me how I know. It was definitely a painful lesson. Alcohol cotton pads can effectively disinfect and quickly evaporate without leaving any moisture, preparing for the next step of applying glue. Apply a thin layer of silicone glue, just like putting a band-aid on a wound. Be gentle and try to evenly cover the crack with the glue. Be careful not to apply too thickly, otherwise the glue will dry and form a hard block, affecting the feel of the dildo. Use a UV lamp to irradiate for 20 minutes. During these 20 minutes, you can take the opportunity to browse TikTok and relax. The UV lamp's irradiation can accelerate the curing of the glue and quickly bond the crack. However, be careful not to irradiate for too long, as it may cause damage to the silicone material. Apply two layers of liquid silicone. Some brands of liquid silicone repair cream even have a mint flavor. Applying it not only further strengthens the repaired area but also makes you feel happy. After applying two layers of liquid silicone, let it dry naturally. The entire repair process is basically completed. However, remember to do a 48-hour water immersion test after the repair to check if there is any leakage. Don't rush to practice, as it may cause unexpected situations. 

What should we do if a dildo sex toy stops vibrating?

This situation is even more frustrating than when your date has premature ejaculation. But don't worry. Follow the steps below to check and fix a dildo sex toy. First, disassemble the base to check the wires. In most cases, the toy stops vibrating because the wires have come loose from the soldering. Carefully open the base and closely examine each wire's connection point with the circuit board to see if there are any loose or unsoldered areas. If you find any unsoldered areas, you need to re-solder them with a soldering iron. Use a multimeter to test the motor's resistance. Set the multimeter to the resistance setting and measure the resistance of the vibration motor. The normal value is usually between 5 - 15Ω. If the resistance value is not within this range, it indicates that the motor may be damaged and needs to be replaced.Replace the micro vibration motor. When purchasing a new vibration motor, be sure not to buy a phone vibrator by mistake. Although they look similar, their performance and parameters are quite different. Choose the appropriate vibration motor and replace it according to the original installation method, ensuring it is securely installed. Apply conformal coating to the circuit board. This step is very important as it can prevent short circuits in the circuit board due to sweat secreted during climax in future use. Conformal coating forms a protective film on the surface of the circuit board, providing protection against moisture, dust, and corrosion, and extending the circuit board's lifespan.

What should we do if a dildo sex toy’s temperature function fails?

First, carefully remove the failed heating module, being careful not to damage other surrounding components. The heating module is usually located inside the dildo and requires careful disassembly to remove.Check if there are any broken or short-circuited wires in the heating module. If you find any wire problems, you can use a soldering tool to repair them. If the wires are fine, it might be that the heating element itself is damaged and needs to be replaced with a new one.After replacing the heating element or repairing the wires, reinstall the heating module and test it. During the testing process, be sure to control the temperature to avoid overheating and damaging the dildo.

What are the mistakes you must avoid when handling a dildo sex toy?

Many people like to directly soak their a dildo sex toy in disinfectant for cleaning, which is a very wrong practice. Especially for sex toys with electronic components, once water gets into the circuit, it's basically game over. The correct way to disinfect is to wipe the surface with alcohol wipes or use a specialized toy disinfectant for spray disinfection. Never put silicone sex toys in the microwave to heat them up. This is no joke. Silicone will deform, melt, and may even release harmful gases under the high temperature of the microwave. Besides, who wants their sex toy to end up like a pizza? Oil-based lubricants, although they provide long-lasting lubrication, can corrode the internal components of sex toys in no time. Especially for silicone toys, oil-based lubricants can cause the silicone to expand and deform, damaging the toy. Therefore, always choose water-based lubricants, which are safe and easy to clean.

How to maintain a dildo sex toy?

The reason why my toy has lasted for 5 years is not without reason. Here are some maintenance tips you must remember: Use specialized silicone maintenance oil. Although it's more expensive than essence, it can effectively maintain the softness and elasticity of the silicone and extend the lifespan of a dildo sex toy. When maintaining, evenly apply the maintenance oil on the surface of the sex toy and gently massage to allow the oil to fully penetrate. This is no joke. When charging a dildo sex toy, put on a condom to prevent the interface from oxidizing. The condom can isolate air and moisture, preventing the interface from being damaged due to moisture or oxidation and ensuring stable charging. When storing a dildo sex toy, wrap it with memory foam to keep its shape and prevent the silicone from deforming due to long-term compression. Memory foam can fit the shape of a dildo sex toy, providing good support and protection. Regularly apply conductive paste on the contact points of the sex toy to prevent poor contact. Conductive paste can reduce the resistance of the contact points and improve the conductivity, ensuring the toy works properly during use. 

Repair or Replace?

When the repair cost exceeds 60% of the price of a new item, it's time to let go and buy a new a dildo sex toy. After all, high repair costs are not only uneconomical but also cannot guarantee the performance of the toy after repair. However, if it's a limited edition or custom-made item, that's a different story. For these toys with special significance, it's recommended to contact a professional repair station. They have professional skills and equipment to better restore and maintain these precious dildos.

Steps to Steps to Repair Your Dildos:

1. First, inspect the dildo for any visible damage or defects, such as cracks or tears in the material.
2. If the dildo has a battery-operated motor, check to ensure the batteries are fresh and working properly.
3. If the dildo has any removable parts, such as a suction cup or vibrating bullet, make sure they are securely attached and functioning properly.
4. If the dildo has a detachable or adjustable base, ensure that it is securely attached and not loose or wobbly.
5. If the dildo has any cracks or tears, consider purchasing a repair kit or adhesive to fix the damage.
6. If the dildo is made of silicone, it may be possible to repair small tears or cracks by heating the material with a hair dryer or hot water, and then applying pressure to smooth out the damage.
7. If the dildo is made of a porous material, such as jelly or rubber, it may not be possible to repair it and it may need to be replaced.
8. If the dildo is still not functioning properly after attempting these steps, consider contacting the manufacturer for assistance or replacing the dildo altogether.

The Needed Attachments to Repair A Dildo:

1. Screwdriver or pliers
2. Screws or bolts
3. Glue or adhesive
4. Silicone or rubber sealant
5. Electrical tape or duct tape
6. Replacement parts (if needed)
7. Safety goggles and gloves for protection.

How to Take Good Care of Your Dildos?

1. Clean your dildo before and after each use with warm water and a mild, toy-safe cleaner.
2. Store your dildo in a clean and dry place, away from direct sunlight and other heat sources.
3. Avoid using harsh chemicals or abrasive materials on your dildo, as they can damage the material and cause it to deteriorate over time.
4. Use plenty of lubricant during use to prevent any discomfort or irritation.
5. Inspect your dildo regularly for any signs of wear or damage, and replace it if necessary.
6. Follow the manufacturer's instructions for any additional care and maintenance, such as charging or replacing batteries for battery-operated models.

Conclusion:

Finally, a heartfelt word: It's not embarrassing when a toy breaks. On the contrary, it shows that you have used it frequently and fully enjoyed the happiness it brought.If you have any suggestions or ideas, you can comment in the comment section or send me a private message.